ONKYO HTP-360 Manual Do Utilizador

 

26

 

• Before making any AV connections, read the manuals 

supplied with your other AV components.

• Don’t connect the power cord until you’ve completed 

and double-checked all AV connections.

 

The AV receiver’s optical digital jack has shutter-type 
cover that open when an optical plug is inserted and 
close when it’s removed. Push plugs in all the way.

 

 To prevent shutter damage, hold the optical 

plug straight when inserting and removing.

 

RCA-type AV connections are usually color coded: red, 
white, and yellow. Use red plugs to connect right-chan-
nel audio inputs and outputs (typically labeled “R”). Use 
white plugs to connect left-channel audio inputs and out-
puts (typically labeled “L”). And use yellow plugs to 
connect composite video inputs and outputs.

• Push plugs in all the way to make 

good connections (loose connec-
tions can cause noise or malfunc-
tions).

• To prevent interference, keep 

audio and video cables away from 
power cords and speaker cables.

 

 The AV receiver does not support SCART plugs.

Left (white)

Right (red)

(Yellow)

Left (white)

Right (red)

(Yellow)

Right!

Wrong!

 

Component video separates the luminance (Y) and 
color difference signals (P

 

R

 

, P

 

B

 

), providing the best 

picture quality. (Some TV manufacturers label their 
component video jacks slightly differently.)

 

Composite video is commonly used on TVs, VCRs, 
and other video equipment. Use only dedicated 
composite video cables.

 

Offers the best sound quality and allows you to 
enjoy surround sound (e.g., Dolby Digital, DTS). 
The audio quality is the same as for coaxial.

 

Offers the best sound quality and allows you to 
enjoy surround sound (e.g., Dolby Digital, DTS). 
The audio quality is the same as for optical.

 

This cable carries analog audio. It’s the most com-
mon connection format for analog audio and can be 
found on virtually all AV components. 

 

This cable carries multichannel analog audio and is 
typically used to connect DVD players with a 5.1-
channel analog audio output. Several standard ana-
log audio cables can be used instead of a multichan-
nel cable.

HT-S3100_3105_En.book Page 26 Friday, February 1, 2008 9:14 AM