Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. SKF-550F
  5. Manual Do Utilizador

ONKYO SKF-550F Manual Do Utilizador

Download
Página de 72
 
44
 
Listening to the Radio
 
With the built-in tuner, you can enjoy AM and FM radio 
stations.
 
■
 
AM Frequency Step Setup (not North America)
 
You must specify the AM frequency step used in your 
area. Note that when this setting is changed, all radio 
presets are deleted.
 
Tuning into AM/FM Radio Stations
 
■
 
Auto Tuning  Mode
 
■
 
Manual Tuning  Mode
 
The American model changes FM frequency in 0.2 MHz 
steps, 10 kHz steps for AM. For other models it’s 
0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for 
AM.
When tuned into a station, the TUNED indicator 
appears. When tuned into a stereo FM station, the FM 
STEREO indicator also appears.
 
Tuning into Weak FM Stereo Stations
 
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to 
Manual Tuning mode and listen to the station in mono.
 
Note:
 
• You can also use the remote controller’s Up and Down 
[
]/[
] buttons to tune the radio.
 
Listening to AM/FM Stations
 
1
 
Use the [TUNER] input selector 
button to select AM or FM.
 
In this example, FM has been selected.
(Actual display depends on country.)
 
1
 
Press the [SETUP] button, use the Up 
and Down [
]/[
] buttons to select “0. 
Hardware Setup,” and then press 
[ENTER].
 
2
 
Use the Up and Down [
]/[
] buttons 
to select “AM Freq,” and then use the 
Left and Right [
]/[
] buttons to 
select:
 
10 kHz:
 
Select if 10 kHz steps are used in 
your area.
 
9 kHz:
 
Select if 9 kHz steps are used in 
your area.
 
3
 
Press the [SETUP] button.
 
Setup closes.
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAY
STEREO
DIMMER
MEMORY
DIGITAL INPUT
TUNING MODE
A
B
SPEAKERS
TUNER
TAPE
AUX
CBL/SAT
VCR/DVR
DVD
MULTI CH
C D
SETUP
ENTER
SETUP MIC
RETURN
CLEAR
LISTENING MODE
AUDIO
L
R
AUX INPUT
STANDBY/ON
PHONES
TUNING
PRESET
TUNING
TUNER
TUNING MODE
TUNER
Band
Frequency
 
1
 
Press the [TUNING MODE] button 
so that the AUTO indicator 
appears on the display.
 
2
 
Press the TUNING Up or Down 
[
]/[
] button.
 
Searching stops when a station is 
found.
 
1
 
Press the [TUNING MODE] button 
so that the AUTO indicator disap-
pears from the display.
 
2
 
Press and hold the TUNING Up or 
Down [
]/[
] button.
 
The frequency stops changing when 
you release the button.
Press the buttons repeatedly to change 
the frequency one step at a time.
TUNING MODE
TUNING
PRESET
TUNING MODE
TUNING
PRESET
AUTO
TUNED
FM STEREO
HT-SR800_En.book Page 44 Tuesday, January 30, 2007 11:09 AM