Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. SKF-550F
  5. Manual Do Utilizador

ONKYO SKF-550F Manual Do Utilizador

Download
Página de 72
 
57
 
Advanced Setup
 
—Continued
 
Note:
 
• These settings cannot be changed while headphones 
are connected, speaker set B is on, or the multichannel 
DVD input is being used.
 
Crossover Frequency
 
This setting only applies to the speakers that you speci-
fied as 
 
Small
 
 in the “Speaker Configuration” on page 56.
To get the best bass performance from your speaker sys-
tem, you need to set the crossover frequency according 
to the size and frequency response of your speakers
 
Notes:
 
• For a more accurate setting, look up the frequency 
response in the manuals supplied with your speakers 
and set accordingly. 
• Choose a higher crossover frequency if you want more 
sound from your subwoofer.
• These settings cannot be changed while headphones 
are connected, speaker set B is on, or the multichannel 
DVD input is being used.
 
7
 
Use the Down [
] button to 
select “Surr Back,” and use the 
Left and Right [
]/[
] buttons to 
select 
 
Small
 
, 
 
Large
 
, or 
 
None
 
.
 
Small:
 
  Select if the surround back 
speakers are small.
 
Large:
 
  Select if the surround back 
speakers are large.
 
None:
 
  Select if no surround back 
speakers are connected.
 
Notes:
 
• If the Surround setting in step 6 is set 
to None, this setting does not appear.
• If the Surround setting in step 6 is set 
to Small, the Large option cannot be 
selected.
 
8
 
Use the Down [
] button to 
select “Surr Back Ch,” and use 
the Left and Right [
]/[
] but-
tons to select 
 
2ch 
 
or 
 
1ch
 
.
 
2ch:
 
Select if two (left and right) 
surround back speakers are 
connected.
 
1ch:
 
Select if one surround back 
speaker is connected.
 
Note:
 
• If the Surround and Surr Back set-
tings in steps 6 and 7 are set to None, 
this setting does not appear.
Continue with step 9 of the “Crossover 
Frequency” setting.
 
9
 
Use the Down [
] button to 
select “Crossover,” and then use 
the Left and Right [
]/[
] but-
tons to select a crossover fre-
quency.
 
Use the diameter of the smallest 
speaker in your system when choosing 
the crossover frequency.
 
*Choose the setting suitable for the speaker.
 
Continue with step 10 of the “Double 
Bass” setting on the next page.
This setting is set automatically by the Automatic 
Speaker Setup function (see page 37).
Speaker cone 
diameter
Crossover 
frequency
Over 8 in.
(20 cm)
40/50/60Hz*
6-1/2 to 8 in.
(16–20 cm)
80Hz
5-1/4 to 6-1/2 in.
(13–16 cm)
100Hz (default)
3-1/2 to 5-1/4 in.
(9–13 cm)
120Hz
Under 3-1/2 in.
(9 cm)
150/200Hz*
HT-SR800_En.book Page 57 Tuesday, January 30, 2007 11:09 AM