ONKYO SKM-540S Manual Do Utilizador
35
First Time Setup
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver digitally (coaxial or opti-
cal).
Here are the default assignments.
DVD player to the AV receiver digitally (coaxial or opti-
cal).
Here are the default assignments.
With this function, you can change the digital inputs
assign. If, for example, you connect your DVD player to
the DIGITAL IN OPTICAL 1 input (OPT1), you’ll need
to assign it to the DVD input source, as follows.
assign. If, for example, you connect your DVD player to
the DIGITAL IN OPTICAL 1 input (OPT1), you’ll need
to assign it to the DVD input source, as follows.
Note:
Make sure that components connected digitally are con-
figured to output digital audio. Refer to the relevant man-
uals.
figured to output digital audio. Refer to the relevant man-
uals.
If you connect an
-capable Onkyo MiniDisc
recorder, CD recorder or next generation HDD-compat-
ible component to the TAPE IN/OUT or VIDEO 2 IN
jacks, for
ible component to the TAPE IN/OUT or VIDEO 2 IN
jacks, for
to work properly, you must change this
setting.
This setting can only be changed on the AV receiver.
Note:
HDD can be selected for the TAPE input selector or
VIDEO 2 input selector, but not both at the same time.
VIDEO 2 input selector, but not both at the same time.
Assigning Digital Inputs to Input
Sources
Sources
Input selector
Default assignment
DVD
COAX
VIDEO 1
OPT 1
VIDEO 2
OPT 2
VIDEO 3
- - - -
TAPE
- - - -
CD
OPT 3
1
Press the input selector button
for the input source that you want
to assign.
for the input source that you want
to assign.
(Digital inputs cannot be assigned to
the TUNER input source.)
the TUNER input source.)
2
Press the [DIGITAL INPUT]
button.
button.
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
OPT1, OPT2, OPT3, or “– – – –”
(analog).
ton repeatedly to select COAX,
OPT1, OPT2, OPT3, or “– – – –”
(analog).
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAY
STEREO
DIMMER
MEMORY
DIGITAL
INPUT
TUNING
MODE
A
B
SPEAKERS
TUNER
TAPE
VIDEO
3
VIDEO
2
VIDEO
1
VCR
DVD
MULTI CH
C D
SETUP
RETURN
CLEAR
LISTENING MODE
AUDIO
L
R
VIDEO
3
INPUT
STANDBY/ON
PHONES
TUNING
PRESET
ENTER
1
2, 3
TAPE
C D
VIDEO
3
DVD
VIDEO
1
VCR
VIDEO
2
DIGITAL
INPUT
DIGITAL
INPUT
Changing the Input Display
1
Press the [TAPE] or [VIDEO 2]
input selector button so that
“TAPE” or “VIDEO2” appears on
the display.
input selector button so that
“TAPE” or “VIDEO2” appears on
the display.
2
Press and hold down the [TAPE]
or [VIDEO 2] input selector but-
ton (about 3 seconds) to change
the setting.
or [VIDEO 2] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
HDD.
For the TAPE input selector, the setting
changes in this order:
HDD.
For the TAPE input selector, the setting
changes in this order:
TAPE
→
MD
→
CDR
→
HDD
For the VIDEO 2 input selector, the set-
ting changes in this order:
ting changes in this order:
VIDEO 2
↔
HDD
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAY
STEREO
DIMMER
MEMORY
DIGITAL
INPUT
TUNING
MODE
A
B
SPEAKERS
TUNER
TAPE
VIDEO
3
VIDEO
2
VIDEO
1
VCR
DVD
MULTI CH
C D
SETUP
RETURN
CLEAR
LISTENING MODE
AUDIO
L
R
VIDEO
3
INPUT
STANDBY/ON
PHONES
TUNING
PRESET
ENTER
1, 2
1, 2
TAPE
VIDEO
2
or
TAPE
VIDEO
2
or
→
HT-S790_En.book Page 35 Friday, February 17, 2006 3:28 PM