Runco LS-10I Manual Do Utilizador
Runco LS-10i Installation/Operation Manual
39
PRE
L
IMINAR
Y
3.9
Changing the OSD
Language
Changing the OSD
Language
When you turn on the LS-10i for the first time, the OSD Language Menu appears.
The LS-10i can display the menus in English, French, German, Italian, Spanish, Swedish,
Portuguese or Russian.
Portuguese or Russian.
Press
or to select a language. Then, press ENTER to confirm your selection.
3.10
Adjusting the Picture
Orientation
Adjusting the Picture
Orientation
If the LS-10i is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
match the installation method. To do this, press MENU on the remote control. Then,
select System from the Main Menu.
Rear Projection
If the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly
to select Rear Projection from the System Menu. Press
or
to set it to On.
Ceiling Mode
If the projector is ceiling-mounted, the LS-10i automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off.