Runco LS-3 Manual Do Utilizador
24
Runco LS-3/LS-5 Installation/Operation Manual
PRE
L
IMINAR
Y
3.6
Connections to the
LS-3/LS-5
Connections to the
LS-3/LS-5
Proceed as follows to connect the LS-3/LS-5 to your video sources, external controller(s)
– if present – and AC power.
– if present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel Access
Using a flat-blade screwdriver, loosen the two
screws holding the rear compartment cover
in place.
screws holding the rear compartment cover
in place.
Then, remove the rear compartment cover by
tilting it upward.
tilting it upward.
➤