Sony HT-DDW870 Manual Do Utilizador
masterpage:Left
lename[D:\SONY SEM 2005\Revision Data\HT-
DDW870\J9050000_2549734151DDW870UCA\2549734151\GB03CON_HT-DDW870-UCA.fm]
model name1[HT-DDW870]
[2-549-734-15(1)]
18
GB
Performing initial setup
operations
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
display alternatingly.
3
Press ENTER.
“CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SPEAKER SET UP,
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SPEAKER SET UP,
LEVEL, TONE and CUSTOMIZE
menus.
menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME –/+ is set to “VOL
MIN”.
You can use the SPEAKER SET UP menu to set
the distance and location of the speakers
connected to this receiver.
the distance and location of the speakers
connected to this receiver.
1
Press ?/1 to turn on the receiver.
2
Press MAIN MENU repeatedly to select
“
“
SET UP
”.
3
Press
or
repeatedly to select the
parameter you want to adjust.
For details, see “SPEAKER SET UP menu
parameters” below.
parameters” below.
Note
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
4
Press + or – repeatedly to select the
setting you want.
setting you want.
The setting is entered automatically.
5
5: Setting up the speakers
GB01COV_HT-DDW870-UCA.book Page 18 Monday, June 20, 2005 4:43 PM