Yamaha DVX-S303 Manual Do Utilizador

■ Video setup menu

1

In DVD/CD mode, press SET UP.

2

Press   /   to select [VIDEO SETUP PAGE] icon.

3

Press ENTER (OK) to confirm.

This menu contains the options for selecting the color 
system that matches the connected TV. For details, see 
“Selecting the TV type” on page 24.

This menu contains the options for matching the aspect 
ratio of the receiver to the connected TV. For details, see 
“Setting the TV display” on page 25.

The progressive scan display present 60 complete frames 
per seconds, rather than 30 frames per second of interlaced 
scanning (ordinary normal TV system). With nearly 
double the number of lines, progressive scan offers higher 
picture resolution and eliminates bothersome motion 
artifacts those jagged edge on moving objects.

Before enabling the progressive scan function, you must 
ensure:
1

Turn on your TV progressive scan function (refer to 
your TV owner’s manual).

2

You have connected the DVD receiver to your TV 
using Y P

 (see “Connecting a TV” on page 19).

1

In [VIDEO SETUP PAGE], press  

/ 

 to 

highlight [PROGRESSIVE], then press  .

OFF
Select this to disable progressive scan function.

ON
Select this to enable progressive scan function.

2

Press  

/ 

 to select a setting and press ENTER 

 to confirm.

→ 

Follow the instructions shown on the TV to 

confirm the selection (if any).
–

 

If a blank/distorted TV screen appears, wait for 15 

seconds for auto recovery to activate.

If you are changing the setting to 

OFF 

by using the remote 

control, follow the procedure below.

1

Open the disc tray.

2

Press , 

then press ANGLE.

This receiver comes with three predefined sets of picture 
color settings and one personal setting that you can define 
yourself.

1

In [VIDEO SETUP PAGE], press  

/ 

 to 

highlight [PICTURE SETTING], then press  .

STANDARD
Select this for the standard picture setting.

BRIGHT
Select this to make the TV picture brighter.

SOFT
Select this to make the TV picture softer.

PERSONAL
Select this to personalize your picture color by 
adjusting the brightness, contrast, tint and color 
(saturation). 

2

Press  

/ 

 to select a setting and press ENTER 

 to confirm.

3

If you selected [PERSONAL], proceed to step 4.

→ 

The [PERSONAL PICTURE SETUP] menu 

appears.