Yamaha DSP-AX861SE Manual Do Utilizador

• Minimum RMS Output Power for Front, Center, Surround, 

Surround back

20 Hz to 20 kHz, 0.06% THD, 8 

Ω  .................................... 105 W

• Dynamic Power (IHF)

Front L/R, 8/6/4/2 

Ω  ...................................... 140/175/205/250 W

• Maximum Output Power

Speaker impedance setting: 8

Ω 1 kHz, 0.7% THD, 4 Ω ..... 155 W

• IEC Output Power

Front L/R, 1 kHz, 0.06% THD, 8 

Ω  ................................... 115 W

• Damping Factor (IHF)

Front L/R, SPEAKERS A, 20 Hz to 20 kHz, 8 

Ω 

.................................................................................  120 or more

• Input Sensitivity/Input Impedance

PHONO (MM).........................................................  3.5 mV/47 k

Ω

CD, etc.  ..................................................................  200 mV/47 k

Ω

MULTI CH INPUT ................................................  200 mV/47 k

Ω

• Maximum Input Voltage

PHONO (MM)

1 kHz, 0.1% THD  ..............................................  60 mV or more

CD, etc. 

Effect On, 1 kHz, 0.5% THD  ..............................  2.3 V or more

• Rated Output Voltage/Output Impedance

OUT (REC) ...........................................................  200 mV/1.2 k

Ω

PRE OUT ..................................................................  1.0 V/1.2 k

Ω

SUBWOOFER (2ch Stereo, FRONT SP: SMALL)

................................................................................  1.0 V/1.2 k

Ω

• Headphone Jack Rated Output/Impedance

CD, etc. (1 kHz, 50 mV, 8 

Ω) ................................. 150 mV/100 Ω

• Frequency Response

CD to Front L/R, 10 Hz to 100 kHz 

...................................................................................... +0/–3 dB

• RIAA Equalization Deviation

PHONO (MM) .............................................................. 0 ± 0.5 dB

• Total Harmonic Distortion

PHONO (MM) to OUT (REC) 

20 Hz to 20 kHz, 1 V  ............................................  0.02% or less

CD, etc. to Front L/R 

2ch Stereo, 20 Hz to 20 kHz, 50 W, 8 

Ω ............... 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

PHONO (MM, 5 mV) to OUT (REC)
    .............................................................................  81 dB or more
CD, etc. (Effect Off, 250 mV) to Front L/R 

...........................................................................  100 dB or more

• Residual Noise (IHF-A Network)

Front L/R  ...............................................................  150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO (shortened) to Front L/R  ............... 60 dB/55 dB or more
CD, etc. (5.1 k

Ω shortened) to Front L/RZ .... 60 dB/45 dB or more

• Volume Control  ......................................  MUTE/ – 80 dB to 16.5 dB

• Tone Control (Front L/R)

BASS Boost/Cut ...................................................... ±10 dB/50 Hz
BASS Turnover Frequency  .................................................350 Hz
TREBLE Boost/Cut  .............................................. ±10 dB/20 kHz
TREBLE Turnover Frequency  ...........................................3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. 

(FRONT SP, CENTER SP, SUR. L/R SP, SUR.B L/R SP: 
SMALL/SML) ............................................................12 dB/oct.

L.P.F. (Subwoofer)  .........................................................24 dB/oct.

• Video Format (Gray Back)

  ...............................................................................................  PAL

• Video Format (Video Conversion)  ................................. NTSC/PAL

• Signal Level

Composite .................................................................  1 Vp-p/75 

Ω

S-video ............................. 1 Vp-p/75 

Ω (Y), 0.286 Vp-p/75 Ω (C)

Component ....................  1 Vp-p/75 

Ω (Y), 0.7 Vp-p/75 Ω (P

B

/P

R

)

• Maximum Input Level (Video Conversion Off) 

...............................................................................  1.5 Vp-p or more

• Signal to Noise Ratio 

....................................................................................  50 dB or more

• Frequency Response (MONITOR OUT)

Component (Video Conversion Off) 

................................................................ 5 Hz to 60 MHz, –3 dB

• Power Supply  ........................................................ AC 230 V, 50 Hz

• Power Consumption  ..............................................................  440 W

• Standby Power Consumption  ......................................  0.1 W or less 

• AC Outlet  ........................................................ 1 (100 W maximum)

• Dimensions (W x H x D)  ................................  435 x 171 x 421 mm

(17-1/8 x 6-3/4 x 15-1/2 in)

• Weight  ...........................................................  13.1 kg (28 lbs 14 oz)

* Specifications are subject to change without notice.