Yamaha DSP-AX861SE Manual Do Utilizador

Press 3

SCENE1 button.

“DVD MOVIE VIEWING” appears in the front panel 
display, and this unit automatically optimize own 
status for the DVD playback.

y

The indicator on the selected SCENE button lights up while 
this unit is in the SCENE mode.

y

If the connected DVD player is a Yamaha product and has 
capability of the SCENE control signals with the REMOTE 
OUT jack of this unit (see page 23), this unit can 
automatically activate the DVD player and start playback 
when you press the 3SCENE1 button. Refer to the 
instruction manual of the DVD player for further 
information.

Rotate 4

VOLUME to adjust the volume.

When you change the input source or sound field program, 
the SCENE mode is deactivated, and the indicator on the 
selected SCENE button turns off.

■ Using the other SCENE buttons
In the following cases, try pressing the corresponding 
SCENE button to enjoy the playback of the desired 
sources.

Case A: “I want to listen to a music disc from the 

connected DVD player...”

 Press 3

SCENE2 (or 

A

SCENE2) to select “Music 

Case B: “I want to watch a TV program...”

 Press 3

SCENE3 (or 

A

SCENE3) to select “TV 

To use the “TV Viewing” template (Case B), you must 
connect a satellite receiver, a cable TV receiver or an HDTV 
decoder to this unit in advance. See page 20 for details.

Case C: “I want to listen to a music program of the 

FM/AM/DAB radio station...”

 Press 3

SCENE4 (or 

A

SCENE4) to select “Radio 

To use the “Radio Listening” template (Case C), you must 
connect an FM/AM/DAB tuner to this unit in advance. See 
page 21 for details.

y

If you cannot find the desired situation, you can select and change 
the assigned SCENE template for the SCENE buttons. See 
page 33 for details.

Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to 
“6

Ω MIN” before using this unit (see page 25). 4 ohm 

speakers can be also used as the front speakers (see 
page 90).