Yamaha DSP-AX861SE Manual Do Utilizador

y

When you select a sound field program, SILENT CINEMA mode 
activates automatically (see page 46).

• When you connect headphones, no signals are output at the 

speaker terminals.

• All Dolby Digital and DTS audio signals are mixed down to the 

left and right headphone channels.

Press M

MUTE on the remote control to mute the 

audio output. 
Press MMUTE again to resume the audio output.

y

• You can also rotate 4VOLUME on the front panel or press 

KVOLUME +/– to resume the audio output.

• You can adjust the muting level by using the “MUTE TYPE” 

parameter in “SOUND MENU” (see page 68).

• The MUTE indicator flashes in the front panel display when the 

audio output is muted and disappears from the front panel 
display when the audio output is resumed.

You can combine a video image from a video source with 
sound from an audio source. For example, you can enjoy 
listening to classical music while viewing beautiful 
scenery from the video source on the video monitor.

Press the input selector buttons (B) on the 
remote control to select a video source and then 
an audio source.

y

Set the “BGV” parameter in the “MULTI CH SET” menu to the 
desired setting to select the default background video input source 
of the MULTI CH INPUT sources (see page 72).

You can display the format, sampling frequency, channel, 
bit rate and flag data of the current input signal.

Set the operation mode selector to L

AMP 

and then press N

SET MENU on the remote 

control.
The top “SET MENU” display appears in the OSD.

Press Dn repeatedly to select “SIGNAL 
INFO” and then press D

ENTER.

The audio information about the input source appears 
in the OSD.

Press Dl / h to toggle between the audio 
and video information displays.

Press N

SET MENU on the remote control 

SET MENU

. ;AUTO SETUP

;MANUAL SETUP

.A;SIGNAL INFO

[ ]/[ ]:Up/Down
[ENTER]:Enter

p

p