Yamaha DVX-700 Manual Do Utilizador

■ Placing the speakers using the 

You can place the speakers in an upright position or a 
horizontal position. Put the speakers on the stands and 
secure them with the screws.

Place the speaker on the stand vertically, and then secure it 
with the screw as shown in the illustration.

Put the speaker on the stand so that the black side of the 
speaker becomes outside, and then secure it with the screw 
as shown in the illustration.

■ Placing the speakers on a wall

Put the speakers on a wall using commercially available 
screws. Refer to the illustration below for the screw size.

1 When placing the speakers on a wall, remove the 

stands.

2 Install screws on a wall as shown in the illustration.

The distance between the screws: 126 mm for both 
sides

3 Insert the screws into the holes on the back of the 

speaker.

– To attach the speaker to a wall with screws, the 

wall must be firm. If not you may cause the speaker 
to fall.

Tapping screw (Available at the hardware store) 
Dia.4 mm (1/8")