Yamaha DVX-S301 Manual Do Utilizador

■ Setting a TV

Make sure you have completed all the necessary connections 
(see “Connecting a TV” on page 19).

1

Press DVD/CD.

→ 

“

DVD/CD

” appears in the display panel.

2

Turn on the TV and set to the correct video-in channel. 

→ 

You should see the background screen on the TV.

–

 

Usually this channel is between the lowest and 

highest channels and may be called FRONT, A/V IN 
or VIDEO. See your TV manual for more details.
–

 

Or, you may go to channel 1 on your TV, then press 

the Channel down button repeatedly until you see the 
Video In channel.
–

 

Or, the TV remote control may have a button or 

switch that chooses different video modes.

In order for a DVD to play on this DVD receiver, the color 
system of the DVD, the TV and the DVD receiver should 
match. Before changing the TV system, determine the 
color system of your TV.

1

In DVD/CD mode, press SET UP.

2

Press   repeatedly to select [VIDEO SETUP PAGE]. 

3

Press  

/  

to highlight [TV TYPE], then press 

.

4

Press  

/  

to highlight one of the options below: 

 – Select this if the connected TV has the PAL 

color system. It will change the video signal of an 
NTSC disc and output it to PAL format. 
NTSC

 – Select this if the connected TV has the NTSC 

color system. It will change the video signal of a PAL 
disc and output it to NTSC format. 
MULTI

 – Select this if the connected TV is compatible 

with both NTSC and PAL (multisystem). The output 
format will be in accordance with the video signal of 
the disc.

5

Select a setting and press ENTER (OK).

–

 

Follow the instructions shown on the TV to confirm 

the selection (if any).
–

 

If a blank/distorted TV screen appears, wait for 15 

seconds for auto recovery to activate.

 When you are selecting color system by using the remote 
control, follow the procedure below.

1

Open the disc tray.

2

Press , 

then 

press 

.

→ 

If the default setting of the color system is NTSC, 

it will be changed to PAL.

→ 

If the default setting of the color system is PAL, it 

will be changed to NTSC.