Yamaha DVX-S301 Manual Do Utilizador

Thank you for purchasing this unit. This Owner’s Manual 
explains the basic operation of this unit.

– This receiver is designed for use with the following 

discs: Super Audio CD (Super Audio CD), DVD-
Video, Video CD, Super Video CD, Audio CD, CD-
R, CD-RW, DVD-Audio, DVD+RW, DVD+R, 
DVD-R, DVD-RW and DVD-RW (VR format).

This receiver can play:

– MP3 and picture (Kodak, JPEG) files recorded on 

CD-R(W).

– JPEG/ISO 9660 format
– Maximum 30 character display
– DivX

®

 disc on CD-R[W]/DVD+R[W]/ 

DVD-R[W](3.11, 4.x and 5.x)

– CD-R, CD-RW and DVD-RW (VR format) cannot 

be played unless finalized.

– Some discs cannot be played depending on the 

recording conditions, such as the PC environment 
and application software. The characteristics and 
condition of some discs; materials, scratches, 
curvature, etc, may result in playback failure.

– Be sure to use only CD-R and CD-RW discs made 

by reliable manufacturers.

– Do not use any non-standard shaped discs (heart-

shaped, etc.).

– Do not use discs with tape, seals, or paste on their 

surface. Doing so may damage this receiver.

– Do not use discs affixed with labels printed by a 

commercially available label printer.

– When a disc becomes dirty, clean it with a cleaning 

cloth. Wipe the disc from the center out. Do not 
wipe in a circlar motion.

– Do not use solvents such as benzine, thinner, 

commercially available cleaners, or antistatic spray 
intended for analog records.

– Do not expose the system, batteries or discs to 

humidity, rain, sand or excessive heat (caused by 
heating equipment or direct sunlight). Always keep 
the disc tray closed to avoid getting dust on the lens.

– The lens may cloud over when the receiver is 

suddenly moved from cold to warm surroundings, 
making it impossible to play a disc. Leave the 
receiver in the warm environment until the moisture 
evaporates.

– Write only on the printed side of a CD-R/ 

CD-RW and only with a soft felt-tipped pen.

– Handle the disc by its edge; do not touch the 

surface.

– Use a soft cloth slightly moistened with a mild 

detergent solution. Do not use a solution containing 
alcohol, spirits, ammonia, or abrasives.

– Place the receiver on a flat, hard, and stable surface.