JVC DD-3 Manual Do Utilizador
11
English
Set
ting up t
h
e IP a
ddre
s
s
You can skip this part when the main unit and the
computer are connected to a router that uses
DHCP function.
computer are connected to a router that uses
DHCP function.
You must assign the IP address to the main unit
manually in the following cases.
manually in the following cases.
Case 1: When you have assigned an IP address
to the computer manually
Case 2: When you have connected the main
unit to the computer directly
Refer also to “Connecting the main unit to
the computer directly” on page 19.
Refer also to “Connecting the main unit to
the computer directly” on page 19.
This part explains the procedure for determining
the IP address of the computer by displaying the
network setup.
the IP address of the computer by displaying the
network setup.
NOTE
• Depending on the computer settings, you may
• Depending on the computer settings, you may
need operations different from the explanation
given in this part. Refer to “Help” in Windows for
the following steps.
given in this part. Refer to “Help” in Windows for
the following steps.
(On the computer)
1
Click [Start] and then “Control
Panel”.
Panel”.
The “Control Panel” dialog box is displayed.
Occasions requiring the IP
address setup
address setup
Manual
setup for IP
address
Router
Manual
setup for IP
address
Example:
192. 168. 0. 3
192. 168. 0. 3
Example: 192. 168. 0. 4
Manual
setup for IP
address
Example: 192. 168. 0. 3
Example: 192. 168. 0. 4
Manual
setup for IP
address
Determining the IP address of
the computer
the computer
Setting up the IP address
DD-83[J].book Page 11 Thursday, September 28, 2006 9:16 AM