Denon AVR-2310CI Manual Do Utilizador
Get
ting Star
ting Star
ted
Pla
ybac
ybac
k
Remot
e Contr
ol
Inf
or
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Set
tings
tings
Connecting Devices not Equipped with HDMI terminals
SIRIUSConnect Home Tuner
SIRIUS Connector
• The AVR-2310CI is a SIRIUS Satellite Radio Ready® receiver. �ou can receive SIRIUS® Satellite Radio by
connecting to the SiriusConnect Home Tuner and subscribing to the SIRIUS service.
• Plug the SIRIUS connector on the rear panel.
• Position the Home Tuner antenna near a south-facing window to receive the best signal.
For details, see “Listening to SIRIUS Satellite Radio Programs” (vpage 44, 45).
When making connections, also refer to the operating instructions of the SiriusConnect Home Tuner.
• Position the Home Tuner antenna near a south-facing window to receive the best signal.
For details, see “Listening to SIRIUS Satellite Radio Programs” (vpage 44, 45).
When making connections, also refer to the operating instructions of the SiriusConnect Home Tuner.
NOTE
Keep the power cord unplugged until the SiriusConnect Home Tuner connection have been completed.
“SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries.
All rights reserved. Service not available in Alaska and Hawaii.”
All rights reserved. Service not available in Alaska and Hawaii.”
n
Positioning the Antenna
For a consistent satellite signal, the antenna must be positioned correctly. Use the following map to
determine which area you are in and position the antenna accordingly.
determine which area you are in and position the antenna accordingly.
q
w
e
r
t
SOUTH
NORTH
WEST
SKY
EAST
HORIZON
Area 1
:
Point the antenna toward the sky in the east,
northeast, or southeast, either through a
window or outside.
Area 2
:
Point the antenna toward the sky in the north
or northeast, either through a window or
outside.
Area 3
:
Point the antenna toward the sky in the north
or northwest, either through a window or
outside.
Area 4
:
Point the antenna toward the sky in the west,
northwest, or southwest, either through a
window or outside.
Area 5
:
Put the antenna outside and point it straight
up. The antenna cannot be used indoors.
b
When connecting
digital audio
digital audio
Connections
Direction of broadcasting station
AM loop
antenna
(supplied)
antenna
(supplied)
FM antenna
75 Ω/ohms
Coaxial cable
Coaxial cable
FM indoor antenna
(supplied)
Ground
AM outdoor antenna
Antenna terminals
n
AM loop antenna assembly
1
Remove the vinyl tie and take
out the connection line.
out the connection line.
2
Bend in the reverse direction.
3
With the antenna
on top of any
stable surface.
on top of any
stable surface.
3
With the antenna
attached to a wall.
attached to a wall.
-1
-2
Mount
Installation hole Mount on wall, etc.
1
Push the lever.
2
Insert the conductor.
3
Return the lever.
n
Connection of AM antennas
NOTE
• Do
not
connect
two
FM
antennas
simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do
not touch metal parts of the panel.
Set this to change the input signal to which the input source
is assigned.
“Input Assign” (vpage 37)
is assigned.
“Input Assign” (vpage 37)
Set as necessary