Denon AVR-2310CI Manual Do Utilizador
39
Get
ting Star
ting Star
ted
Connections
Pla
ybac
ybac
k
Remot
e Contr
ol
Inf
or
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Making the input settings (Input Setup)
Setting items
Setting contents
Decode Mode
Set the input source’s
decoding mode.
Set the input source’s
decoding mode.
Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This can be set for input sources for which “HDMI” or “Digital” is
assigned at “Input Assign” (vpage 37).
• Normally set this to “Auto”.
Setting items
Setting contents
Rename
Change the input source’s
display name to the desired
name.
Change the input source’s
display name to the desired
name.
1. Use
o
p
to set the cursor to the character you want to change.
2. Use
ui
to change the character, then press
.
Up to 8 characters can be input.
The input character type can be switched by pressing
while the
display name is being changed.
• The types of characters that can be input are as shown below.
G
Upper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
G
Lower case charactersH abcdefghijklmnopqrstuvwxyz
G
SymbolsH ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
G
NumbersH 0123456789 (Space)
•
•
•
Default
The changed display names
are reset to the defaults.
The changed display names
are reset to the defaults.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
No : Do not reset to the defaults.
Changing the Input Source’s Display Name (Rename)
Default settings are underlined.
Use this procedure to change the display name of the currently selected input source.
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Set
tings
tings
Setting items
Setting contents
Input Mode
Set the audio input modes for
the different input sources.
Set the audio input modes for
the different input sources.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
b
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
source
DVD
HDP
TV
SAT/CBL
VCR
Default
setting
setting
Auto
HDMI
Digital
Auto
Analog
Input
source
source
DVR
V.AUX
CD
TUNER
Default
setting
setting
Auto
Auto
Analog
Analog
• The “HDMI” settings are made for input sources for which HDMI
input terminals are assigned at “Input Assign” (vpage 37).
• The “Digital” settings are made for input sources for which digital
input terminals are assigned at “Input Assign” (vpage 37).
• When a digital signal is properly input, the “
” indicator lights on
the display. If the “
” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
• This can also be set by pressing
.
Each time you press the button, the input mode display will change.
Auto
HDMI
Digital
Analog
EXT. IN
The selectable input modes depend on the input source and “Input Assign” setting
(vpage 37 “Changing the input sources assigned to the input terminals”).
(vpage 37 “Changing the input sources assigned to the input terminals”).
Changing the Input Source’s Input Mode and
Decoding mode (Input Mode)
Decoding mode (Input Mode)
Default settings are underlined.