Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Denon
  4. AVR-2310CI
  5. Manual Do Utilizador

Denon AVR-2310CI Manual Do Utilizador

Download
Página de 78
ENGLISH
Get
ting Star
ted
Connections
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifi
 cations
Multi-Zone
Set
tings
1
Turn the power on for all the equipment connected by
HDMI cable.
2
Set  the  HDMI  control  function  for  all  equipment
connected by HDMI cable.
Set “HDMI Control” (vpage 31) to “ON“.
b
 
Please refer to the owner’s manual as regards setting of connected 
devices.
b
 
Carry  out  Steps  1  and  2  should  any  of  the  equipment  be 
unplugged.
3
Switch the television input to the HDMI connected to
the AVR-2310CI.
4
Switch  the  AVR-2310CI  input  to  the  HDMI  input
source and check if the picture from the player is ok.
5
When you turn the TV’s power to standby, check that
the power of the AVR-2310CI and player also goes on
standby.
If  the  HDMI  control  function  does  not  operate  properly,  check  the 
following points.
• Is the TV or player compatible with the HDMI control function?
• Is the AVR-2310CI properly set?
• Is “HDMI Control” (vpage 31) set to “ON”?
• Is “Power Off Control” (vpage 31) set to “ON”?
• Are the HDMI control function settings of all equipment correct?
NOTE
Should  any  of  the  operations  below  be  performed,  the  interlocking 
function may be reset, in which case, repeat step’s 1 and 2.
Menu “HDMI” (vpage 31) setting has changed.
There is a change to the connection between the equipment and the 
HDMI, or an increase in equipment.
•
•
NOTE
•  When you power off AVR-2310CI, the HDMI control function does 
not operate.
•  Some  functions  may  not  operate  depending  on  the  connected 
TV or player. Check the owner’s manual of each device for details 
beforehand.
•  When “HDMI Control” is set to “ON”, it is not possible to assign an 
HDMI terminal to “TV” at “HDMI” (vpage 31).
•  When “HDMI Control” (vpage 31) is set to “ON”, power is supplied 
constantly to the AC outlet (UNSWITCHED).
Convenient functions
When  you  make  an  HDMI  connection  with  a  TV  or  player 
compatible  with  AVR-2310CI  and  HDMI  control  functions,  you 
can perform the following operations by setting the HDMI control 
function of each device.
Press   and display the time you want to set.
The “SLEEP” indicator on the display lights.
 
•  The  time  switches  as  shown  below  each  time 
  is 
pressed.
Sleep:OFF
Sleep:120min
Sleep:30min
Sleep:60min
Sleep:90min
 
•  The  time  display  turns  off  after  about  5  seconds,  and  the 
setting is activated.
 
•  Once the set time has passed, the power is automatically set 
to standby.
This  function  allows  you  to  automatically  set  the  power  to  standby 
after the set amount of time has passed.
When  the  sleep  timer  turns  the  power  off  in  the  MAIN  ZONE,  the 
power also turns off in the ZONE2.
HDMI Control Function
Setting the Power to Standby 
After a Certain Amount of Time 
(Sleep Timer Function)
n
 To cancel the sleep timer
  Press 
 to set “OFF”.
  •  The “SLEEP” indicator on the display turns 
off.
• To  play  the  TV’s  sound  on  the  AVR-2310CI,  make  optical  digital 
connections (vpage 14 “Connecting the monitor (TV)”).
• To use this function, set “HDMI Control” (vpage 31) to “ON”.
Rear
n
   AVR-2310CI  power  off  can  be  linked  to  the  TV 
power off step
z
When you set “Output audio from amp” in the TV audio 
output  setup  operation,  you  can  switch  the  amp  power 
on.
n
   You  can  switch  audio  output  devices  with  a TV 
operation
n
   You  can  adjust  AVR-2310CI  volume  in  the  TV 
volume adjustment operation
n
   You can switch AVR-2310CI input source through 
linkage to TV input switching
n
   When  playing  the  player,  the  AVR-2310CI  input 
function switches to the function of that player
Pla
ybac
k