Viper FANG 18C Manual Do Utilizador

USER MANUAL

ENGLISH

DRAINING TANKS

a) DRAINING SOLUTION TANK

NOTE

Any time scrubbing operation is completed, the solution tank should be drained
and cleaned.

1. Pull down on the clear tube (back left of the machine) to remove it from the hose barb. This will allow the

solution to flow freely into a bucket or floor drain.

2. Rinse the solution tank with clean water after every use. This will help prevent chemical buildup and clogging of

the solution lines.

3. Once tank is rinsed, flushed and drained, reconnect the clear tube to the hose barb. Be sure the tube is

pushed all the way up on the hose barb.

b) DRAINING RECOVERY TANK

WARNING!

If the recovery tank is not drained when the solution tank has been refilled, foam or

water may enter the float shut-off mechanism and cause damage to the vacuum
motor

NOTE

If you are storing the machine for any period of time, always leave the clear

recovery tank lid off the tank so the tank can dry completely and smell fresh. Any
time scrubbing is completed, or when refilling solution tank, the recovery tank
should be drained and cleaned.

1. Remove the drain hose from the holder, and place the drain hose over the floor drain. Twist off the drain hose

plug to begin the draining process.

2. Clean the recovery tank after every use. Use a fresh water hose to rinse out the recovery tank. Be careful not to

spray water into the float shut-off mechanism.

80188EU(1)2009-01

FANG 18C