Sharp MD-MT877C Manual Do Utilizador
– 7 –
MD-MT877/MD-MT877C
The unit may have the following symptoms while recording or editing. The unit is not out of order.
MiniDisc System Limitations
SYMPTOM
“DISC FULL” or “TOC FULL” appears
even though the MiniDisc still has re-
cording time left.
even though the MiniDisc still has re-
cording time left.
The remaining recording time does not
increase even though you erased tracks.
increase even though you erased tracks.
The total of the recorded time and the
remaining time does not match the maxi-
mum recordable time.
remaining time does not match the maxi-
mum recordable time.
Combine function does not work.
Sound skips in fast reverse/forward.
A track number is created in the middle
of a track.
of a track.
LIMITATIONS
More than 255 tracks (maximum) cannot be recorded regardless of the re-
cording time.
If the MiniDisc is recorded or edited repeatedly or if it has scratches (record-
ing skips scratched parts), you may not be able to record the maximum
tracks above.
cording time.
If the MiniDisc is recorded or edited repeatedly or if it has scratches (record-
ing skips scratched parts), you may not be able to record the maximum
tracks above.
The unit does not count non-recorded portions that last 12 or fewer seconds
to display the remaining recording time. The time may not increase even if
you erase short tracks.
to display the remaining recording time. The time may not increase even if
you erase short tracks.
One cluster (approximately 2 seconds) is the minimum unit for recording.
For example, a 3-second track uses 2 clusters (approximately 4 seconds).
Therefore, the actual recordable time may be shorter than the displayed
time.
For example, a 3-second track uses 2 clusters (approximately 4 seconds).
Therefore, the actual recordable time may be shorter than the displayed
time.
A MiniDisc on which recording and editing are repeated may not allow the
combine function.
combine function.
One track is divided and recorded in separate places on a repeatedly re-
corded or edited MiniDisc.
Sound may skip.
corded or edited MiniDisc.
Sound may skip.
A track number may be created if there are scratches or dust on the MiniDisc.
Troubleshooting
Many potential “problems” can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or
service center.
If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or
service center.
The unit does not
turn on.
turn on.
No sound is
heard from the
earphones.
heard from the
earphones.
When the opera-
tion buttons are
pressed, the unit
does not respond.
tion buttons are
pressed, the unit
does not respond.
Some sounds
are skipped.
are skipped.
●
Is the AC adaptor disconnected?
●
Is the battery exhausted?
●
Is the unit in the hold mode?
●
Has condensation formed inside the
unit?
unit?
●
Is the unit being influenced by me-
chanical shock or by static electric-
ity?
chanical shock or by static electric-
ity?
●
Is the volume set too low?
●
Is the remote control unit or the ear-
phones plugged in?
phones plugged in?
●
Are you trying to play a MiniDisc with
data on it instead of a MiniDisc contain-
ing music?
data on it instead of a MiniDisc contain-
ing music?
●
Is the unit in the hold mode?
●
Is the battery exhausted?
●
Is the remote control unit plug or the
earphones plug inserted firmly?
earphones plug inserted firmly?
●
Is the battery exhausted?
●
Is the unit being subjected to exces-
sive vibration?
sive vibration?
●
Has the track number or character
information been updated on the
disc yet?
information been updated on the
disc yet?
●
Is the unit in the recording or edit-
ing mode?
ing mode?
●
Is the MiniDisc protected against
accidental erasure?
accidental erasure?
●
Is the unit connected properly to the
other equipment?
other equipment?
●
Is the AC adaptor unplugged or did a
power failure occur while recording or
editing?
power failure occur while recording or
editing?
●
Is the unit in the hold mode?
●
Is an optical signal being output from
the stereo system?
Read the operation manual for the
stereo system.
the stereo system?
Read the operation manual for the
stereo system.
●
Is the select switch for charging/
operation set on the charging side?
operation set on the charging side?
●
Is the jack clean?
●
Is the remote control display set to
“LIGHT OFF”?
“LIGHT OFF”?
The MiniDisc can-
not be ejected.
not be ejected.
Recording and
editing are im-
possible.
editing are im-
possible.
The battery cannot
be charged.
be charged.
Nothing appears
on the remote
control display.
on the remote
control display.
PROBLEM
CAUSE
PROBLEM
CAUSE