Morphy Richards Steam cleaner Manual Do Utilizador

Steam cleaner

with attachments

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your
new steam cleaner...

• Quick start

1 Fill the tank up to a maximum of 1.4 litres of water (using warm

water and less water will reduce heat-up time). Screw cap on

and tighten fully.

2 Attach the required accessories.

3 Connect to the power supply.

4 Press the on/off button to start heat-up. When orange light turns

off, the steam is ready.

5 Press the trigger on the handle to release the steam.

6 Aim the steam safely: Note at the start water may be ejected.

Hold over a sink or bucket until excess water has cleared.

• Descale

Descale regularly, do not wait for a problem to occur. In very hard

water areas we recommend using distilled water. See page 10 for

descaling instructions.

70530 Rev 4 2/6/04 2:53 PM Page 1