Windsor SC264 Manual Do Utilizador

 CUTTER 24V   86039070   04/10/07 

Plan the scrubbing pattern in advance.  The 
longest track is around the perimeter of the area 
to be cleaned.  For efficient operation, the runs 
should be the longest possible without

 

turning,

  

stopping, or raising and lowering scrub 
deck/squeegee. 
NOTE:  In order to achieve the best possible 
results, the area which is to be cleaned should be 
swept before scrubbing.  Large debris, strings & 
wire must be removed to prevent being caught in 
brushes or squeegee.

 
 
When operating the machine around people, pay 
close attention for unexpected movement. Use 
extra caution around children. 
 
 
Flammable liquids and/or reactive metals can 
cause explosions or fire! Do not pick up. 

 

1.  Turn the machine power on. 

 

2.  Lower the squeegee. 

 

3.  Turn the vacuum on. 

 

4.  Lower the scrub brushes to the floor. 

 

5.  Turn the scrub brushes on (brushes will start 

when machine is propelled).

 

 

6.  Drive machine forward to begin scrubbing. 
NOTE:  Shut machine off immediately if water or 
foam is expelled from the machine. 

 

7.  Adjust the speed of the machine, solution flow 

and scrub brush pressure as necessary. 

 

1.  Release the propel levers. 

 

2.  Turn the scrub brushes off. 

3.  Raise the scrub brushes. 

 

4.  Raise the squeegee. 

5.  Turn the vacuum off. 

6.  Turn the machine power off.