Riccar RCU-H9 Manual Do Utilizador

Página de 28
21
Troubleshooting
General Information
If the vacuum unit does not work, check the fuse or breaker on the unit and/
or in the electrical panel in your home, and replace any defective part(s) as 
deemed necessary. Please verify that the unit has been installed properly, 
according to the instructions in this manual.
Your vacuum cleaning system is designed to collect everyday dry matter 
(dust). It is approved by authorized testing agencies for dry use only. Do 
not use on wet surfaces.
Should you accidentally vacuum liquids, immediately unplug the unit 
from the electric outlet, then empty and wipe the dust receptical with a 
dry cloth. Then operate the system from the vacuum inlet through which 
you  vacuumed the liquid, in order to eliminate all moisture in the piping 
system.
We strongly recommend against vacuuming abrasive materials such as 
cement, plaster and gyproc dust. This fine dust could work its way into 
the motor, causing considerable damage. Should you do so inadvertently, 
immediately clean the filters and, as a precautionary measure, contact 
your authorized service center to determine the extent of the damage to 
the unit.
Remember that in order for your warranty to remain valid, maintenance of the 
motor and repairs to the unit itself must be carried out by an authorized service 
center using original Riccar parts.