Beko BKS 9118 Manual Do Utilizador

Part 4: Maintenance and Cleaning

Emptying The Tank and Cleaning 

the Filters

• Since the appliance has volume 

of 16 lt. for dry cleaning, there is no 

need to clean up often.

• If the suction significantly drops, 

it can be understood that the filter 

is saturated.

• You can rinse the filter with tepid 

water after shaking the filter to 

remove dusts.

• The wet capacity of the appliance 

is 11 lt.

• During the wet suction, when the 

liquid reaches to the maximum level 

the float automatically block the 

motor entrance and the suction will 

be cut off. In this case you can 

empty the tank and restart to 

process.

Warnings

• Except wet vacuuming, dust filter 

should always be attached to the 

appliance.

• During the wet use, if the float 

come up and block the suction 

before the liquid reaches the max. 

level, switch off the appliance and 

wait until the float drops back into 

its previous position (you can hear 

the noise when the float drops 

back). If the problem repeats, stop 

the appliance, unplug and check if 

the float sponge is saturated. You 

should clean up the filter and replace 

it after drying, then you can restart 

the appliance.

During the use, if the appliance 

overturns, the float will block the 

suction again. You should stop the 

motor, put into original position, and 

wait until the float drops back.

7

Figure 16

Figure 17