Kenwood TK-2402V Manual Do Utilizador

ii

•  Do not charge the transceiver and battery pack when they 

are wet.

•  Ensure that there are no metallic items located between the 

transceiver and the battery pack.

•  Do not use options not specified by KENWOOD.
•  If the die-cast chassis or other transceiver part is damaged, 

do not touch the damaged parts.

•  If a headset or headphone is connected to the transceiver, 

reduce the transceiver volume.  Pay attention to the volume 
level when turning the squelch off.

•  Do not place the microphone cable around your neck while 

near machinery that may catch the cable.

•  Do not place the transceiver on unstable surfaces.
•  Ensure that the end of the antenna does not touch your 

eyes.

•  When the transceiver is used for transmission for many 

hours, the radiator and chassis will become hot.  Do not 
touch these locations when replacing the battery pack.

•  Do not immerse the transceiver in water.
•  Always switch the transceiver power off before installing 

optional accessories.

•  The charger is the device that disconnects the unit from the 

AC mains line. The AC plug should be readily accessible.