Kenwood 440 MHz TH-D7A Manual Do Utilizador

42

7 Repeat steps 5 and 6 to enter up to 8 digits.

• Pressing [OK] after selecting the 8th digit causes the

cursor to move to the start of the next field.

• To complete programming the name after entering

less than 8 digits, press [OK] twice.

• Each press of [ESC] causes the cursor to move

backward.

• Pressing [A/B] deletes the digit at which the cursor

is blinking.

8 Press the keys in sequence on the keypad to

enter a DTMF number with up to 16 digits.

• You may press [UP]/ [DWN] then [OK] to select

each digit.  Select a space if you want to put a
pause.

9 Press [OK] to complete the programming.

10 Press [MENU] to exit Menu mode.

You can confirm the stored DTMF number by using
steps 1 to 3.

You can also use the keypad to enter alphanumeric
characters in step 5.  For example, each press of
[TNC] switches entry as A, B, C, a, b, c, then 2.
Press [ENT] to switch among the special ASCII
characters.

If you use the 10 dedicated memory channels to store
DTMF numbers, you need not remember a long string of
digits.

■

Note:  Audible DTMF tones from other transceivers near you (or from
your own speaker) may be picked up by your microphone.  If so, you
may fail to correctly program a DTMF number.

1 Press [MENU] to enter Menu mode.

2 Press [1], [3], [1] to select “1–3–1 (STORE)”.

3 Press [UP]/ [DWN] to select from channel 0 to 9.

4 Press [OK].

• The display for entering a memory name appears;

the first digit blinks.

• To skip naming the channel, press [OK] again.  You

can jump to step 8.

5 Press [UP]/ [DWN] to select a character.

• You can enter alphanumeric characters plus special

ASCII characters.

6 Press [OK].

• The cursor moves to the next digit.

TH-D7 E 41 DTMF Functions

98.12.4, 0:12 PM

42