Sony DWT-P01 Manual Do Utilizador

28

Setting Menus

The frequency of the low-cut filter can be 
set.

OFF: Turns off the low-cut filter.
20 30 40 50 60 70 80 90 100
120 140 160 180 200 220 (Hz): 
Low-cut filter is set according to the 
selected frequency.

Using wireless remote control, this function 
can be controlled from the receiver and 
other devices.

To conserve power, this setting allows you 
to put all transmitter functions to sleep.

ACTIVE: The transmitter operates 
normally.
SLEEP: The sleep function is on. During 
sleep, the POWER indicator flashes at 2-
second intervals.

During sleep, press the SET, +, or – button.

You can also use the wireless remote 
control to change the receiver back to 
normal operation.

You can display the accumulated battery 
use time as a rough estimate of total 
transmitter usage.
The factory setting is “00:00”.

Hold down the SET button until the 
time indication flashes.

Press the – button so “00:00 RESET” 
appears, and then press the SET 
button.

You can turn the +48 V power supply on or 
off for microphones that require an external 
power supply.

OFF: Power is not supplied to the 
connected microphone.
ON: Power is supplied to the connected 
microphone.

Using wireless remote control, this function 
can be controlled from the receiver and 
other devices.

 

The +48 V power supply can be turned on 
or off, regardless of INPUT LEVEL setting. 
Note, however, that the +48 V power is 
actually supplied only when INPUT 
LEVEL is set to MIC.