Rinnai RU80E Folheto

RU80e (KB2530WD)

Type of Appliance

Rinnai model number

Operation / Installation

Minimum/Maximum Gas Rate (Input)

Electrical

Electrical Consumption

Ignition System

Hot Water Capacity

Temperature

Temperature (without remote)

Approved Gas Types

Energy Factor (EF)

Service Connections

Isolation & Pressure Relief Valves Included

Water Flow Control

Minimum/Maximum Water Supply Pressure

Condensing, Tankless, Temperature controlled, continuous flow,
gas hot water system, Energy Star Qualified

REU-KB2530WD-US

Forced combustion; outdoor only

15,200 - 152,000 BTU/h

Appliance:

AC 120 Volts - 60 Hz

Temperature Controller:

DC 12 Volts

Normal: 41 w Standby: 2 w Anti-frost protection: 168 w

Direct electronic ignition

Minimum flow rate: 0.26 GPM
Minimum activation flow rate: 0.4 GPM
Maximum flow rate: 8.0 GPM

98° - 120° F (factory default) Maximum temperature is selectable at
120° F or at 140° F; 98° - 185° F available with the MCC-91-2
controller for commercial and hydronic applications

120° F (factory default) or 140° F

Natural or Propane (ensure unit matches gas type)

Natural Gas: 0.96

Propane: 0.96

Gas supply: 3/4 inch MNPT
Cold water inlet: 3/4 inch MNPT
Hot water outlet: 3/4 inch MNPT

Heavy duty forged brass Webstone Isolator valves EXP E2, certified
to NSF/ANSI 61-8 for potable water

Water flow sensor, electronic water control and by-pass control

15 - 150 PSI (50 PSI or above is recommended for maximum flow)

RU80e SP 3/2012

FLOW TABLE

Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior
notice. Local, state, provincial and federal codes must be adhered to prior to installation.

Water Flow (gpm)

delta T - Temperature Rise (ºF)

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

100

125

150