Brother S-7200C Manual Do Utilizador
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
41
５
-３. Data initialization function
NOTE:
When DIP switch 1 is set to ON, set it to OFF and then carry out the following operations.
1
Change to initialization mode
(While pressing the continuous backtack key, press the power ON switch.)
* The only initialization item is clear all.
Display
Initialization item
1 [in.AL]
Clear all
(Sewing programs (panel display), memory switch settings, speed settings and
function settings [Refer to <Setting item list> (P.40)] will be initialized.)
function settings [Refer to <Setting item list> (P.40)] will be initialized.)
2
Function setting mode will be exited and normal operation will be possible.
(If you would like to cancel initialization, set the power switch to OFF.)
(If you would like to cancel initialization, set the power switch to OFF.)
4206M
[in.AL] will appear in the display (1).
(Press for 2 seconds or more.)
4222M