Husqvarna C10 Manual Do Utilizador

59

4.  Use the arrow “ 

 “ or “ 

 “ button to check what 

you have programmed.

5.  Press the “ 

 “ button to leave the memory mode 

and return to the Direct mode.

Attention: The selected pattern will be cleared from the memory module after closing 
the machine if you do not press the “ 

 “ button again when you have completed your 

selection.

While in the memory mode, press the “ 

 “ button 

or  the “ 

 “ button until the stitch number you have 

selected is displayed, then add the new stitch or 
change the stitch length, width, Auto-stop or mirror, if 
desire.  

If you wish to delete a certain stitch within in the 
memory mode, use the “ 

 “ button or “ 

 “ button 

until the actual stitch number is displayed. 

Press the ” 

 “ button to delete the selected pattern 

and the following patterns in the program will move 
back.