RCA 2130 Manual Do Utilizador
14
Everyday use
“I cannot make or
answer
answer
calls”
If the
handset‟s display is blank, it may have
been switched off. Press and hold the HANG-UP
key to switch it back on.
key to switch it back on.
Check that the base
unit‟s main power adapter
is plugged in and power is switched on.
The base unit needs main power for normal
operation of the phone
operation of the phone
– not just for charging the batteries.
Make sure you are using the telephone line
cable supplied with your phone. Other telephone
line cables might not work. Move the handset
closer to the base unit.
line cables might not work. Move the handset
closer to the base unit.
Check the battery level symbol on the display.
If it is low, replace the handset on the base unit
or charger pod to recharge the batteries.
or charger pod to recharge the batteries.
Switch off power at the main socket, wait for a
short time and then switch back on. This may
solve the problem.
short time and then switch back on. This may
solve the problem.
“I cannot make a call”
If the handset display shows KEYS LOCKED,
press and hold the * button to unlock it before
you make a call.
press and hold the * button to unlock it before
you make a call.
Only one handset (or the base unit) can be
connected to the outside line at a time.
connected to the outside line at a time.
If another handset is already using the line,
you need to wait until it has finished its call.
you need to wait until it has finished its call.
“When I press on
the keys, nothing
happens”
the keys, nothing
happens”
Make sure the batteries are fitted in your
handset. If the Battery Level symbol on the
display shows
handset. If the Battery Level symbol on the
display shows
„low‟, put your handset back on
the cradle to charge.
“When I key in
a number, it
a number, it
appears on the display,
but I cannot make
but I cannot make
an outside
call”
Try a different position for the base unit
–
somewhere higher if possible, or further from
other electrical equipment.
other electrical equipment.
Try moving the handset closer to the base unit.