Sony RCD-W100 Manual Do Utilizador
Recording/Editing
25
X
H
x
DECK A/DECK B
INPUT
REC
z
OPEN/CLOSE
REC
z
INPUT
X x
H
With the label side up
3
After “New Track” appears in the
display, press
display, press
H
on DECK B to start
recording.
Synchro-Recording starts. DECK A and
DECK B will automatically stop after
recording.
DECK B will automatically stop after
recording.
To stop recording
Press x.
To record only your favorite CD
tracks
You can record only your favorite CD tracks
using Program Play. Between steps 1 and 2,
perform steps 1 to 4 of “Creating Your own
Program (Program Play)” (page 19).
using Program Play. Between steps 1 and 2,
perform steps 1 to 4 of “Creating Your own
Program (Program Play)” (page 19).
Note
When Program Play is selected, you cannot perform
Make-Disc Synchro-Recording.
Make-Disc Synchro-Recording.
To record from several discs
(RCD-W500C only)
In step 1, set the play mode to “ALL DISCS”
or “PGM” and program the discs you want to
record, then proceed to step 2.
or “PGM” and program the discs you want to
record, then proceed to step 2.
Notes
• When the play mode is set to “ALL DISCS”, the
recording starts from the disc whose indicator lights
in green. Then the following discs are recorded.
(After Disc 5, Disc 1 is selected).
in green. Then the following discs are recorded.
(After Disc 5, Disc 1 is selected).
• If you select “ALL DISCS” even though you want
to record only one disc, discs you did not intend to
record may be recorded.
record may be recorded.
Recording on a CD-R or
CD-RW Manually
CD-RW Manually
You can start recording from the end of the
existing material. Before recording, see page
20.
existing material. Before recording, see page
20.
When using the remote, set DECK A/DECK B
to DECK B.
to DECK B.
• After recording, you must finalize the disc.
Until the disc is properly finalized, it cannot
be played on any CD players. See
“Finalizing a CD-R or CD-RW” on page 29.
be played on any CD players. See
“Finalizing a CD-R or CD-RW” on page 29.
1
Turn on the amplifier and the sound
source, and then select the sound
source on the amplifier.
source, and then select the sound
source on the amplifier.
2
Press OPEN/CLOSE of DECK B and
place a recordable CD-R or CD-RW on
DECK B.
Press OPEN/CLOSE again to close the
disc tray.
place a recordable CD-R or CD-RW on
DECK B.
Press OPEN/CLOSE again to close the
disc tray.
continued