ONKYO C-1VL Manual Do Utilizador

12

Plug the supplied power cord into this AC INLET.
• Before you plug in the C-1VL, confirm that all con-

nections have been made properly.

• Turning on the power may cause a momentary power 

surge, which might interfere with other electrical 
equipment on the same circuit, such as computers. If 
this happens, use a wall outlet on a different circuit.

• Do not use a power cord other than the one supplied 

with the C-1VL. The power cord supplied is designed 
for use with the C-1VL and should not be used with 
any other device.

• Never have the power cord disconnected from the 

C-1VL while the other end is plugged into the wall 
outlet. Doing so may cause an electric shock. Always 
connect by plugging into the wall outlet last and dis-
connect by unplugging from the wall outlet first.

■ To turn off the C-1VL, press POWER button again

In the C-1VL, the digital audio output is turned off by 
default to get better analog audio signal quality.
When connecting to digital recorder like MD recorder 
and performing digital recording, press the DIGITAL 
OUTPUT button to enable the digital audio output.

DIGITAL OUTPUT

DISPLAY

C

-

1VL

COMPACT DISC PLAYER

POWER

POWER

Tip:
In general, turning on the playing component (C-
1VL) before turning on the amplifier will lower the 
load to the speakers. On the other hand, when you 
turn off the component and amplifier, turning off the 
amplifier before turning off the playing component is 
recommended.

ON: Outputs digital audio signal.
When you listen to the digital output or 
record the audio signal from the C-
1VL digitally on a digital recorder, 
enable the digital audio output.
OFF: Disable the digital audio signal 
output.
Turning off the digital audio signal 
output reduces the effect from digital 
signal on the analog signal circuit, pro-
ducing better quality sound.

DIGITAL OUTPUT

DISPLAY

C

-

1VL

COMPACT DISC PLAYER

POWER

DIGITAL OUTPUT