ONKYO DV-CP701 Manual Do Utilizador

41

Configuring the DV-CP701—Continued

With these settings you can specify how the DV-CP701 out-
puts digital audio signals. The options you choose will 
depend on the type of AV component that you connect to the 
DV-CP701’s digital audio outputs.

■ Dolby Digital Out

 

With this setting you can configure the DV-CP701 to output 
Dolby Digital audio as it is or downmix it to 2-channel PCM.

If you’re connecting the DV-CP701’s digital audio outputs to 
an AV component with a built-in Dolby Digital decoder, 
select Dolby Digital. If you’re connecting to a hi-fi amp with 
a digital input, an AV receiver with a built-in Dolby Pro 
Logic decoder, or an external D/A converter, select Dolby 
Digital > PCM.

Dolby Digital audio is output as 

it is.

Dolby Digital audio is downmixed 

and output as 2-channel PCM digital audio.

■ Linear PCM Out

With this setting you can configure the DV-CP701 to output 
digital audio with higher sampling rates (e.g., 96 kHz) as it is 
or downsample it to 48 kHz.

If the AV component you connect to the DV-CP701’s digital 
audio outputs supports 96 kHz digital audio, select Down 
Sample Off. Otherwise, select Down Sample On.

96 kHz digital audio is 

downsampled and output at 48 kHz.

96 kHz digital audio is output as it is.

• Some copy-protected DVD-Video discs may use 96 kHz 

digital audio only for A/D conversion to the analog audio 
outputs.

• With some discs, even if you select Down Sample Off, the 

digital audio will be downsampled to 48 kHz, and in some 
cases may not be output by the DV-CP701’s digital audio 
outputs.

■ MPEG Out

With this setting you can configure the DV-CP701 to output 
MPEG digital audio as it is or downmix it to PCM.

If you’re connecting the DV-CP701’s digital audio outputs to 
an AV component with a built-in MPEG decoder, select 
MPEG. Otherwise, select MPEG > PCM.

MPEG digital audio is output as it is.

MPEG digital audio is downmixed and 

output as PCM digital audio.

■ Digital Out

With this setting you can turn the coaxial and optical digital 
audio outputs on or off.

Depending on how you connect the DV-CP701 to your other 
AV components, there may be situations where it’s helpful to 
be able to turn off the digital audio outputs.

Digital audio signals are output by the 

coaxial and optical digital audio outputs.

Nothing is output by the coaxial and optical digital 

audio outputs.

• This setting has no effect on the analog audio outputs.

With the Dynamic Range Control function you can reduce 
the dynamic range of Dolby Digital material so that you can 
still hear quiet parts even when listening at low volume lev-
els—ideal for watching movies late at night when you don’t 
want to disturb anyone.

The full dynamic range is preserved.

The dynamic range of Dolby Digital material is com-

pressed.

• The impact of the Dynamic Range Control function 

depends on the Dolby Digital material that you are playing 
and with some material there will be little or no effect.

With this setting you can select a language for the onscreen 
setup menus and messages.

English.

French.

Spanish.

German.

Italian.