ONKYO DV-CP701 Manual Do Utilizador

 

5

 

The DVD standard uses region numbers to control how discs can 
be played around the world, the world being divided into six 
regions. This unit will only play DVD discs that match its region 

number, which can be found on its rear panel (e.g., 

).

 

This manual explains how to use all of this unit’s functions. 
Although the DVD standard offers many special features, not all 
discs use them all, so depending on the disc being played, this 
unit may not respond to certain functions. See the disc’s sleeve 
notes for supported features.

When you attempt to use a DVD feature that is not 
available, this logo may appear onscreen, indicating 
that the feature is not supported by the current disc or 
this unit.

 

If you need to use the warranty, please provide the serial number 
printed on this unit’s rear panel.

 

Unless it’s for personal use only, recording copyrighted material 
is illegal without the permission of the copyright holder.

 

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, 
READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that 
the voltage in your area meets the voltage requirements printed 
on this unit’s rear panel (e.g., AC 120 V, 60 Hz).

 

 

 

Never handle this unit or its power cord while your hands are 
wet or damp. If water or any other liquid gets inside this unit, 
have it checked by your Onkyo dealer.

 

• Install this unit in a well-ventilated location.

Ensure that there’s adequate ventilation all around this unit, 
especially if it’s installed in an audio rack. If the ventilation is 
inadequate, the unit may overheat, leading to malfunction.

• Do not expose this unit to direct sunlight or heat sources, 

because its internal temperature may rise, shortening the life 
of the optical pickup.

• Avoid damp and dusty places, and places subject to vibrations 

from loudspeakers. Never put the unit on top of, or directly 
above a loudspeaker.

• Install this unit horizontally. Never use it on its side or on a 

sloping surface, because it may cause a malfunction.

• If you install this unit near a TV, radio, or VCR, the picture and 

sound quality may be affected. If this occurs, move this unit 
away from the TV, radio, or VCR.

 

Occasionally, you should dust this unit all over with a soft cloth. 
For stubborn stains, use a soft cloth dampened with a weak solu-
tion of mild detergent and water. Dry the unit immediately after-
wards with a clean cloth. Do not use abrasive cloths, thinners, 
alcohol, or other chemical solvents, because they may damage 
the finish or remove the panel lettering.

 

• If you need to transport this unit, use the original packaging to 

pack it how it was when you originally bought it.

• Do not use volatile liquids, such as insect sprays, near this 

unit. Do not leave rubber or plastic items on this unit for a long 
time, because they may leave marks on the case.

• This unit’s top and rear panels may get warm after prolonged 

use. This is normal.

• When you’ve finished using this unit, remove all discs and 

turn off the power.

• If you do not use this unit for a long time, it may not work 

properly the next time you turn it on, so be sure to use it occa-
sionally.

 

This unit is a high-tech, precision device. If the lens on the opti-
cal pickup, or the disc drive mechanism becomes dirty or worn, 
the picture quality may be affected. To maintain the best picture 
quality, we recommend regular inspection and maintenance 
(cleaning or worn part replacement) every 1,000 hours of use 
depending on the operating environment. Contact your Onkyo 
dealer for details.

 

When you take a glass containing a cold drink outside on a sum-
mer’s day, drops of water, called condensation, form on the out-
side of the glass. Similarly, moisture may condense on the lens 
of the optical pickup, one of the most important parts inside this 
unit.

• Moisture condensation can occur in the following situations:

— The unit is moved from a cold place to a warm place.

— A heater is turned on, or cold air from an air conditioner is 
hitting the unit.

— In the summer, when this unit is moved from an air condi-
tioned room to a hot and humid place.

— The unit is used in a humid place.

• Do not use this unit when there’s the possibility of moisture 

condensation occurring. Doing so may damage your discs and 
certain parts inside this unit.
If condensation does occur, remove all discs and leave this 
unit turned on for two to three hours. By this time, the unit will 
have warmed up and any condensation will have evaporated. 
To reduce the risk of condensation, keep this unit connected to 
a wall outlet.