ONKYO CDR-201A Manual Do Utilizador
47
Operations
Other Information
Timer playback
(component system operation)
When connected to the R-801A component,
playback using the timer is possible. For more
information on how to set the timer, refer to the
instruction manual with the R-801A.
playback using the timer is possible. For more
information on how to set the timer, refer to the
instruction manual with the R-801A.
1
Insert a disc for playback.
2
Set the timer for the R-801A.
Display messages
Message
Explanation
Pages
Open
Disc tray is opening.
−
Welcome
Disc tray is closing.
−
Rec Setup
Setting initial settings for recording. Please wait.
23
TOC Reading
Reading the table of contents recorded on the disc. Please wait.
−
PMA Writing
Recording TOC data to the disc PMA (Program Memory Area).
18
Never turn off the power while this message is displayed.
Wait
Writing or reading of data for track names is taking place during the finalization of
a disc or during the restoring of a disc to its pre-finalization state.
a disc or during the restoring of a disc to its pre-finalization state.
39, 42
Erasing
Erasing all tracks or the last track. Wait until the process is completed.
40, 41
No Track
The tracks are not entered, but the disc name is.
−
If during operation a malfunction occurs or an improper operation is performed, the corresponding message
will appear. For a description of these messages, refer to the explanations on the following pages.
will appear. For a description of these messages, refer to the explanations on the following pages.
Other Information