ONKYO CR-515DAB Manual Do Utilizador

40

The very first time you select DAB, the Auto Tuning 
function automatically scans the DAB Band III and 
L-Band for the multiplexes (i.e., stations) available in 
your area. 
Once the scanning process is complete, the first station 
that was detected is selected.

If a new DAB station is introduced, or you move to a new 
area, you can run the Auto Tuning function again.

1 Press the [MENU/NO] button.
2 Use the Previous and Next [

]/[

] buttons to 

select “Auto Tuning?” and then press [ENTER].

3 Use the Previous and Next [

]/[

] buttons to 

select Worldwide or U.K., (see “Auto Tuning?” on 
page 42), and then press [ENTER] to start the Auto 
Tuning function.

The number of stations found and the scanning progress 
are shown on the display.

To cancel Auto Tuning, press the [ENTER], 
[MENU/NO/CLEAR] or [YES/MODE] button.

1 Push the multi control.
2 Turn the multi control to select “Auto Tuning?” and 

then push it.

3 Turn the multi control to select Worldwide or U.K., 

and then push it to start the Auto Tuning function.

To cancel Auto Tuning, push the multi control.

When tuned into a DAB station, the 
Tuned 

 indicator appears and the 

DAB indicator as well.

On the front panel, press the [INPUT] 
repeatedly to select DAB.

Station name

Tuned indicator

DAB indicator