ONKYO CDR-205X Manual Do Utilizador

24

Perform analog recording to record the signal input
to the analog input terminal of the CDR-205X. The
recording level can be adjusted manually.

• Turn on the CDR-205X (see page 15).
• Place a recordable CD-R or CD-RW in the CDR-

205X (see page 16).

• Verify that the input dial and recording selection

button of the amplifier are set to the position of
the recording source.

RC-413C

RC-414S

INPUT

REC

o

o

REC

s

s

REC

o

EDIT/NO

n

YES

q 

AMCS 

w

Press the o REC button (or the remote
controller REC o button).

“Rec Setup” appears in the display followed by
the time display (the recording standby state).

Press the n button (or the remote
controller s button) and start the
recording source.

Recording starts.
The level sync function turns off.

If the entire disc becomes filled with recordings,
the CDR-205X automatically stops.

Press the oREC button.

Press the n button (or the remote controller g
button). To resume recording, press the n button
(or the remote controller s button).

Press the e button.