Franklin TB15CI Manual Do Utilizador

Página de 44
 
OWNER'S MANUAL
Self Priming Sprinkler Pump 
BEFORE YOU START
BEFORE INSTALLING PUMP, BE SURE TO READ 
THIS OWNER’S MANUAL CAREFULLY. 
REFER TO PRODUCT DATA PLATE(S) FOR 
ADDITIONAL OPERATING INSTRUCTIONS AND 
SPECIFICATIONS.
•  Keep work area clean, well-lit and uncluttered.
•  Keep safety labels clean and in good condition.
•  Replace missing or damaged safety labels.
•  Wear safety glasses while installing or performing 
maintenance on pump.
•  Adhere to the guidelines of the National Electric Code 
(NEC) or Canadian Electric Code (CEC), and any other 
state and local codes for ALL electrical installations.  
Check with the appropriate agencies or contact a 
licensed electrician.
Most water system problems result from improper 
installation. It is suggested that you read this 
manual carefully before installing your pump. The 
“TROUBLESHOOTING SECTION” will assist you in 
locating and eliminating the cause of any trouble you 
may encounter after installation. Check and make 
available all the tools you will need to install your pump. 
Required tools may include wrenches, pipe sealant, pipe 
fi ttings and nipples, screwdriver, etc. 
READ AND FOLLOW SAFETY INSTRUCTIONS
This is the safety alert symbol.  When you see 
this symbol on your pump or in this manual, look 
for one of the following signal words and be alert to the 
potential for personal injury:
D A N G E R
 warns about hazards that 
will
 cause 
serious personal injury, death or major property damage 
if ignored.
W A R N I N G
 warns about hazards that can cause 
serious personal injury, death or major property damage 
if ignored.
C A U T I O N
 warns about hazards that will or can 
cause minor personal injury or major property damage if 
ignored.
NOTICE indicates special instructions, which are 
important but not related to hazards.
Carefully read and follow all safety instructions in 
this manual and on pump.
 
            HAZARDOUS PRESSURE: Do not run 
pump against closed discharge. Release all system 
pressure before working on any component.
 
            Do not run pump dry. Fill pump with 
water before starting or pump will be damaged. 
The motor on this pump is guaranteed by the 
manufacturer and in event of failure it must be returned 
to an authorized service station for repairs. Motor 
warranty  is  void  if  repairs  aren’t  made  by  an  authorized             
repair station.
W A R N I N G
W A R N I N G
C A U T I O N
C A U T I O N
         
W A R N I N G
Be sure to have available proper and adequate wiring 
material to complete the installation correctly.