ONKYO CR-N7 Manual Do Utilizador

47

Selecting a timer number
You can set up to four timers.

Timer operation types
• Timer Play: The specified component starts playback 

at the specified time.

• Timer Rec: The specified component starts recording 

at the specified time.

• The Timer Rec operation is available for recording on 

an Onkyo cassette tape deck that features an 

 con-

nector connected to the CD receiver. Select the correct 
input source.

Selecting media for timer operation
You can select AM, FM or CD on the CD receiver, or a 
DVD or CDR on a connected Onkyo component, or a 
connected external component that features a Timer 
function. (You must set the devices so that the compo-
nent name is displayed correctly on the CD receiver.)
For the Timer Rec operation, you can select AM, FM, or 
an external component that is connected to the LINE 
connector and features the Timer function.

Selecting the day(s) of the week
The Once timer operates only one time. The Every timer 
operates at the specified time on the specified day(s) of 
every week. For the Every timer, you can select any con-
secutive days of the week, such as everyday, every Mon-
day through Friday, or every Saturday and Sunday.

i.e.,
Timer 1: Used as an alarm clock every morning.

Timer Play — Every — Everyday — 7:00-7:30

Timer 2: Records a radio program every week.

Timer Rec — Every — MON - SAT — 15:10-
15:30

Timer 3: Records a radio program only this Sunday.

Timer Rec — Once — SUN — 10:00-12:00

Notes:
• You cannot change the clock or the end time of the 

timer operation during Timer playback or recording.

• You cannot use the Timer function unless the clock is 

set. Be sure to set the clock first.

• If you program a timer on a connected external com-

ponent, be sure to connect the component correctly 
and securely. You cannot use timer playback or 
recording with incomplete connection.

• During the Timer Rec operation, the muting function 

is activated and the audio level is minimized. To listen 
to the audio being recorded, press MUTING on the 
remote controller.

If any of the timers is set, the TIMER indicator lights up. 
If a number indicator is lit, the corresponding timer has 
been programmed. If the number indicator is inside a 
square, the Timer Rec operation is programmed.

If the programmed time overlaps with another timer 
setting
• The timer with the earlier On time is enabled.
• If both timers start at the same time, the timer with the 

lower number is enabled.

Timer 1 9:00 - 10:00
Timer 2 8:00 - 10:00

This timer (with the earlier On time) is 
enabled.

Timer 3 12:00 - 13:00

This timer (with the lower number) is 
enabled.

Timer 4 12:00 - 12:30

When the Sleep timer is set, the unit is placed in Standby 
mode at the specified time.