Alpine TME-S370 Manual Do Utilizador

Use a soft dry cloth for periodic cleaning of the 
product. For more severe stains, please dampen the 
cloth with water only. Anything else has the chance of 
dissolving the paint or damaging the plastic.

Be sure the temperature inside the vehicle is between 
+45°C (+113°F) and 0°C (+32°F) before turning your 
unit on.

If you have problems, do not attempt to repair the unit 
yourself. Return it to your Alpine dealer or the nearest 
Alpine Service Station for servicing.

Make sure the TME-S370 will not be installed in a 
location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

• After turning the system off, a slight ghost of the 

image will remain temporarily. This is an effect 
peculiar to LCD technology and is normal.

• In cold temperature conditions, the screen may lose 

contrast temporarily. After a short warm-up period, it 
will return to normal.

 
Operation of some of the functions of this unit is very 
complex. Because of this, it was deemed necessary to 
place these functions into a special screen. This will 
restrict operation of these functions to times when 
the vehicle is parked. This ensures the focus of the 
driver’s attention will be on the road and not on the 
TME-S370.

This has been done for the safety of the driver and 
passengers. The setup operation cannot be made if the 
car is moving. The car must be parked and the parking 
brake must be engaged for the procedure described 
in the Owner’s Manual to be valid. The warning 
“Operation is not allowed while driving,” will be 
displayed if any attempts are made to perform these 
operations while driving.

290533_TME370_r13.indb   E3

290533_TME370_r13.indb   E3

7/29/09   1:29:12 PM

7/29/09   1:29:12 PM