Panasonic WJ-HD716K/G Manual Do Utilizador
10
Shuttle ring: The following functions are provided.
• Fast forward/reverse playback can be per-
formed during playback.
y Hold button [HOLD]
Press this button during fast forward/reverse play-
Press this button during fast forward/reverse play-
back started by the shuttle ring to hold the current
playback speed (hold playback speed function).
(During hold playback: Blinks green)
playback speed (hold playback speed function).
(During hold playback: Blinks green)
This button can also be used for the panning/tilt-
ing operation of the camera. (During low-speed
panning/tilting control: Lights green)
panning/tilting control: Lights green)
u Maintenance port [MAINTENANCE]
The maintenance port that can be used for con-
The maintenance port that can be used for con-
nection with a PC is provided inside the cover. Do
not use for any operation other than maintenance.
not use for any operation other than maintenance.
i HDD indicators (HDD1 - HDD4)
STS (status): Indicates the operational statuses of
the respective hard disk drive.
Lights green: Indicates that the power of the
Lights green: Indicates that the power of the
respective hard disk drive (formatted) is on.
Blinks green: Indicates that the respective
hard disk drive is for playback use only.
(Recording is unavailable using the respec-
tive hard disk drive.)
(Recording is unavailable using the respec-
tive hard disk drive.)
Blinks orange: Indicates that the respective
hard disk drive is currently being formatted.
Lights red: Indicates that formatting of the
respective hard disk drive has failed.
Off: Indicates that the power of the respective
hard disk drive is off, or that the hard disk
drive is not connected/recognized.
drive is not connected/recognized.
A/F (HDD access/failure): Indicates the status
(access/failure) of the respective hard disk
drive.
Blinks green: Indicates that the respective
drive.
Blinks green: Indicates that the respective
hard disk drive is being accessed.
Lights red: The respective built-in hard disk
drive is faulty (Data recovery is possible by
replacement.)
replacement.)
Blinks red: The respective built-in hard disk
drive is faulty (Data recovery is possible by
replacement.)
replacement.)
Lights red and orange alternately: Indicates
that the respective hard disk drive is cur-
rently being recovered in the RAID 5/RAID
6 mode. (It may appear that the indicator
lights orange when recovery is being pro-
cessed at high speed.)
rently being recovered in the RAID 5/RAID
6 mode. (It may appear that the indicator
lights orange when recovery is being pro-
cessed at high speed.)
Off: Indicates that the respective hard disk
drive is not being accessed.
Important:
• When operating in the RAID5/RAID6 mode and
the HDD indicator lights red, replace the faulty
hard disk drive promptly. Contact your dealer for
replacement of hard disk drives.
hard disk drive promptly. Contact your dealer for
replacement of hard disk drives.
In the RAID 5 mode:
When 2 or more HDD indicators light/blink red, it
When 2 or more HDD indicators light/blink red, it
is impossible to recover data on the faulty hard
disk.
disk.
In the RAID 6 mode:
When 3 or more HDD indicators light/blink red, it
When 3 or more HDD indicators light/blink red, it
is impossible to recover data on the faulty hard
disk.
disk.
o
Monitor operation buttons
[MONITOR] button: Press this button to change
the monitor to be operated. The monitor num-
ber will light to indicate the monitor currently
being selected.
ber will light to indicate the monitor currently
being selected.
[SEQ] button: Press this button to start/stop the
sequence. (During the sequence: Lights green)
[OSD] button: Press this button to display/hide
information such as the camera title.
[MULTI SCREEN] button: Press this button to
change the display pattern of multi-screen.
(The display pattern of multi-screen will
change each time this button is pressed.)
(The display pattern of multi-screen will
change each time this button is pressed.)
!0 Playback control function button
[GOTO LAST] button: Press this button to jump
the playback point to the top of the latest
recorded image.
recorded image.
[GOTO DATE] button: Press this button to desig-
nate time and date of recorded images to be
played.
played.
[SEARCH] button: Press this button to play
recorded images after the recording event
search or the VMD search. (During search and
playback: Lights green)
search or the VMD search. (During search and
playback: Lights green)
[COPY] button: Press this button to display the
menu on which it is possible to copy data onto
a DVD or an SDHC/SD memory card. (☞ Page
59)
a DVD or an SDHC/SD memory card. (☞ Page
59)
!1
[SUB MENU]
button
Press this button to display the submenu used for
camera operation and the electronic zoom.
(☞ Page 16)
(☞ Page 16)