Panasonic WJ-ND400 Manual Do Utilizador
40
Using the Front Panel for Operations
Operate the recorder using the LCD and the buttons on the front panel. The LCD changes as follows when you press the arrow buttons (up or
down).
down).
Basic Operations
(Temperature will be displayed in Fahrenheit for
NTSC model, e.g. "90 ºF")
NTSC model, e.g. "90 ºF")
Date display screen
The date, time and internal temperature (reference value) are displayed. Refer to the
Setup Instructions (PDF file) for more information.
Setup Instructions (PDF file) for more information.
System Information Screen
Information about the recorder system is displayed. You can check device information
such as the software version, hardware version, MAC address, and serial number.
Refer to page 41 for more information.
such as the software version, hardware version, MAC address, and serial number.
Refer to page 41 for more information.
IP Address Information Screen
Displays settings related to the network connection. You can check various network
settings such as the IP address or subnet mask. Refer to page 42 for more
information.
settings such as the IP address or subnet mask. Refer to page 42 for more
information.
IP Address Settings Screen
You can configure settings related to the network connection. You can set various
network settings such as the IP address or subnet mask. Refer to page 43 for more
information.
network settings such as the IP address or subnet mask. Refer to page 43 for more
information.
Key Lock Settings Screen
You can lock the buttons on the front panel to prevent them from being operated.
Refer to page 43 for more information.
Refer to page 43 for more information.
Change HDD Operation Screen
For adding or removing HDDs. Refer to page 45 for more information.
This screen appears only when the [USE] button is pressed.
Manual Reboot Screen
For rebooting the recorder. Refer to page 54 for more information.
ND400_Basic.book 40 ページ ２００８年４月８日 火曜日 午後３時５９分