Panasonic WJ-HD716K Manual Do Utilizador

Note:

• Hard disk drives are locally procured. Contact your deal-

er for purchasing, installing, and replacing the hard disk
drives.

• Refer to the operating instructions of the extension unit

for how to install the HDD units on the extension unit.

Remove the HDD unit

Step 1

Remove the HDD unit brace. (+ Page 52)
Before removing an HDD unit, turn off the power of the
recorder (+ page 55) or the power of the HDD unit to be
removed (+ page 133).

Step 2

(1) Pull the lever while holding down the removal knob on

the HDD unit.

(2) Pull the HDD unit out from the HDD slot while holding

the lever. Pull the HDD unit out carefully so as not to
drop it and handle it gently so as not to give it a shock or
vibration.

Install a hard disk drive into an

HDD canister

To install a hard disk drive in the recorder, it is necessary to
assemble an HDD unit (encase the hard disk drive in the
HDD canister).

Step 1

Fix both sides of the hard disk drive with the dedicated HDD
canister using the 4 provided screws for HDD canister instal-
lation.
Tightening torque for the screws: 0.49 N·m {0.36 lbf·ft} (use
a low-torque powered screwdriver or a torque screwdriver)

Step 2

Fix the bottom of the hard disk drive with the HDD canister
using the 2 provided screws for HDD canister installation.
Tightening torque for the screws: 0.49 N·m {0.36 lbf·ft} (use
a low-torque powered screwdriver or a torque screwdriver)

Important:

• When installing hard disk drives, use a low-torque pow-

ered screwdriver or a torque screwdriver to tighten
screws with the specified torque.

Note:

• Hard disk drives are locally procured. Contact your deal-

er for purchasing, installing, and replacing the hard disk
drives.

Removal

knob of the

HDD unit

Lever

Removal

knob of the

HDD unit

Lever

HDD fixing screws for the HDD canister