Roland Fantom-X8 Manual Do Utilizador

 

The message will be recorded if you assign a check mark (

 

✔

 

), 

and will not be recorded if you remove the check mark.

If you press [F6 (All Off)], no sequencer data will be recorded.

If you press [F7 (All On)], all of the sequencer data will be 
recorded.

 

Realtime Erase is a function that erases unwanted data during 
realtime recording. This is particularly convenient during loop 
recording, since it lets you erase data without stopping recording.

 

Realtime Erase can be executed only if the Recording Mode is 
set to “MIX.”

 

You can also erase the data of a specific channel.

 

The Realtime Recording window appears.

 

fig.18-004_50

 

The Realtime Erase window appears.

 

fig.18-008_50

 

To erase all data (except for Pattern Call messages), press [F7 
(Erase All)]. Data will be erased for as long as you hold down 
the button.

To erase notes of a specific key, hold down that key. Data for 
that note will be erased for as long as you hold down that key.

To erase notes of a specific key range, hold down the top and 
bottom keys of that range. Data for that range will be erased for 
as long as you hold down those keys.

 

You will return to the normal recording state.

 

You can also erase the data of a specific channel.

When recording arpeggios in real time, you can synchronize the 
arpeggio with the sequencer start/stop timing.

 

The Rehearsal function lets you temporarily suspend recording 
during realtime recording. This is convenient when you want to 
audition the sound that you will use next, or to practice the phrase 
that you will record next.

 

The Realtime Recording window appears.

 

fig.18-004_50

 

The [REC] indicator will blink, indicating that you are in 
rehearsal mode. In this state, nothing will be recorded when 
you play the keyboard.

Fantom-X678_r_e.book 173 ページ ２００５年５月１２日　木曜日　午後４時４０分