Roland Fantom-X8 Manual Do Utilizador

 

fig.01-002

fig.01-003

 

 

 

fig.01-004

 

You can connect optional expression pedals (EV-5, etc.) to these 
jacks. By assigning a desired function to a pedal, you can use it to 
select or modify sound or perform various other control. You can 
also connect optional pedal switches (DP series etc.) to sustain 
sound.  -> (p. 25)

 

925

 

An optional pedal switch (DP series etc.) can be connected to this 
jack for use as a hold pedal.  -> (p. 24)

This can also be set so it supports the use of half-pedaling 
techniques. So, after connecting an optional expression pedal (DP-8, 
etc.), you can employ pedal work to achieve even finer control in 
performances in which piano tones are used. 

 

fig.01-005

 

These connectors can be connected to other MIDI devices to receive 
and transmit MIDI messages.

 

fig.01-006

 

These are coaxial-type S/P DIF format digital in/out connectors.

These connectors input and output a digital audio signal (stereo). 
The output signal is identical to the signal that is output from the 
OUTPUT A (MIX) jacks.

 

fig.01-007, 008

 

These jacks output the audio signal to the connected mixer/amplifier 
system in stereo. For mono output, use the L jack. -> (p. 19)

 

These jacks output the audio signal to the connected mixer/amplifier 
system in stereo.

 

These jacks output audio signals in mono to an amp or mixer.

The setting determining whether these jacks are used as stereo 
OUTPUT jacks or monaural INDIVIDUAL jacks is made with the 
Output Assign setting (p. 207).

 

Accept input of audio signals in stereo (L/R) from external devices. 
If you want to use mono input, connect to the L jack.

When recording from a mic, connect it to the L jack, and set Input 
Select (p. 141) to “MICROPHONE.”

 

 

fig.01-003a

 

 

931

 

This connector lets you use a USB cable to connect your computer to 
the Fantom-X.  -> (p. 218)

Fantom-X678_r_e.book 18 ページ ２００５年５月１２日　木曜日　午後４時４０分