Roland Fantom-X8 Manual Do Utilizador

 

To modify the value, use the VALUE dial or the [INC]/[DEC] 
buttons.

 

fig.04-021

 

In each screen of the Fantom-X, you can use the cursor to move 
the area displayed as highlighted, and modify its value.

 

Each parameter has its own range of possible values, so you 
cannot set any value smaller than the minimum value or greater 
than the maximum value.

 

Rotating the VALUE dial clockwise increases the value, 
counterclockwise decreases the value. Holding down [SHIFT] as you 
move the VALUE dial increases value increments so you can make 
large value changes faster.

 

Pressing [INC] increases the value, and [DEC] decreases it. Keep the 
button pressed for continuous adjustment. For faster value increases, 
keep [INC] pressed down and press [DEC]. For decreasing value 
faster, keep [DEC] pressed down and press [INC].

If you press [INC] or [DEC] while holding down [SHIFT], the value 
increments will get bigger.

 

In some cases when the cursor is located at an input location, you 
can press [ENTER] to see a list of parameter values. For some of 
these lists, the screen will show an icon like the following, which 
means you can use the pads to input or specify the value.

 

fig.04-021a

 

PAD 1–9: Input numerals 1–9

PAD 10: Input the numeral 0

BS: Cancels the numeral you input

DEL: Cancels the lowest place of the number you input. If you’ve 
input “15,” pressing DEL will change the value to “1.”

 

fig.04-021a

 

Pressing a pad will directly input the corresponding value. From the 
top, the items in the list correspond to pads 1–16.

When the cursor is located at a parameter value, press [ENTER] 
to display a window where you can set the value. Use 

 

 

to select a value, and then press [ENTER] to finalize the setting.

Fantom-X678_r_e.book 35 ページ ２００５年５月１２日　木曜日　午後４時４０分