Radio Shack CD-3318 Manual Do Utilizador
11
3. Select the track you want by
pressing
SKIP
or
. The
track number you selected
appears on the display.
appears on the display.
Note: To select track 10 or a track
number greater than 10, press
number greater than 10, press
+10
. The track number changes in
increments of ten.
4. Press
PROGRAM
. The selected
track is stored, and the next pro-
gram number appears on the dis-
play.
gram number appears on the dis-
play.
5. Repeat Steps 3 and 4 to store up
to 16 tracks.
Notes:
• You can store the same track
more than once.
• When the 16 tracks of the
sequence are programmed,
-01
and the first track’s num-
ber appear on the display.
6. To complete programming and
play the programmed sequence,
press
press
PLAY/PAUSE
. The CD
player begins playing the first
track of the programmed
sequence. The display shows the
play indicator, the current track
number, and the current track’s
elapsed playing time.
track of the programmed
sequence. The display shows the
play indicator, the current track
number, and the current track’s
elapsed playing time.
Notes:
• Programming is not completed
until you press
PLAY/PAUSE
.
• To repeat, skip over, or search for
tracks, see “Special CD Player
Features.”
Features.”
Checking a Programmed
Sequence
Sequence
To check the programmed sequence,
while the CD is stopped, repeatedly
press
while the CD is stopped, repeatedly
press
PROGRAM
. The display shows
each stored track number.
Erasing a Programmed
Sequence
Sequence
Any of the following will erase a pro-
grammed sequence:
grammed sequence:
• Press
STOP/CLEAR
until
clears from the display and the
CD’s total number of tracks and
playing time appear.
CD’s total number of tracks and
playing time appear.
• Press
STOP/CLEAR
. Then
press
PUSH OPEN
after the CD
stops turning.
• Set
RADIO.CD OFF
to either
TAPE
or
RADIO
.
• Disconnect the power source.
PROGRAM
14-542.fm Page 11 Wednesday, June 30, 1999 3:38 PM