Hamilton Electronics KIDS-CD20 Folheto

Repeat Playback
To Repeat all tracks on a disc 
1. Push Repeat button twice. Repeat Indicator (REPEAT ALL) lights up.
2. Push Play/pause button to begin repeat playback. When the end 
of the last track is reached, the selection returns to track 1 for repeat 
play all tracks. To release Repeat function. Push Repeat button. Repeat 
indicator goes off. When the end of the last track is reached, the play 
stops automatically.

To repeat a track on a disc :
1. Push the forward skip button  until the desired track number 
appears in the Track Number Display.
2. Push Repeat button. Repeat Indicator (REPEAT 1) lights up.
3. Push Play/pause button to begin repeat playback. When the end of 
the track is reached, the playback of the track is repeated.

Installing Batteries:
You will need 8 “C” size batteries. (1.5V x 8)

NOTE: Alkaline batteries will normally last longer and reduce the 
possibilty of battery leakage.
1.Open Battery Door
2. Install Batteries As Shown

NOTE: Watch carefully the       and        ends of the batteries If you don’t 
install batteries correctly the set will not work.

NOTE: If the sound becomes weak and unclear, the batteries may be 
weak. Replace all eight batteries at once.

NOTE: Remove batteries if unit is not to be used for a long period of 
time (about 30 days or more ) to prevent battery leakage and possible 
damage to the unit.

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-Zinc) or rechargeable (Nickel-
Cadmium) batteries.
Non- rechargeable batteries are not to be recharged. 
Rechargeable batteries are to be removed from the toy before being 
charged.
Only batteries of the same or equivalent type as recommended are to 
be used.
Batteries are to be inserted with the correct polarity.
Exhaused batteries are to be removed for the toy.
The supply terminals are not to be short-circulted.

The use of the Microphone
1. Plug the tail-end of the Handy Microphone into the Mic jack 
(No.10 on diagram).
2. When using the Microphone turn the switch to on position.
3. Speak in normal voice about 2 inches from the Microphone.
4. Avoid placing Microphone close to speakers of the unit to 
prevent squeaking noise due to feedback from speakers.
5. When not using Microphone always disconnect it from the 
unit.

Power Source:                 DC12V “C” Size battery x8, (UM2, IEC R14)

Output power:                1.5w + 1.5W
Speakers:                          (3”) Full range Speaker x 2
Load Impedance:           Headphones 16-50 ohms 
                                            (Recommended 32 ohms)
Dimensions:                    255mm(L) X 190mm(W) X 120mm(H)
Weight:                             1.2 KG

CD Play
Type: Compact Disc player
Audio Channels: 2
Wow And Flutter: Unmeasurable (Less than 0.001% W.Peak).

IT IS IMPORTANT TO CHECK REGULARLY FOR DAMAGE TO THE 
CORD PLUG ENCLOSURE OR OTHER PARTS OF THE ADAPTOR TO 
PREVENT FROM POTENTIAL HAZARDS.

THE TRANSFORMER USED WITH THE TOY MUST COMPLY WITH 
THE REQUIREMENT OF EN60742

For technical support, contact us:
Web:  www.HamiltonBuhl.com
Email:  techsupport@hamiltonbuhl.com
Phone:  1-800-631-0868

™