Alpine pmn Manual Do Utilizador
94
U41117-J-Z125-7-76
Operator configuration
Operating and monitoring CentricStor
The figure below shows some of the possible configurations for an SNMP manager for
connecting GXTXCC to the triggering CentricStor on the basis of a trap:
connecting GXTXCC to the triggering CentricStor on the basis of a trap:
Figure 34: Configuration options at an SNMP management station
–
In the case of configurations in which there is an external connection between
GXCC and an InfoBroker (shown here in blue), an RMT license is required in
the relevant CentricStor.
GXCC and an InfoBroker (shown here in blue), an RMT license is required in
the relevant CentricStor.
–
The InfoBroker accepts a maximum of two local connections. It is irrelevant here
whether the X11 server runs within CentricStor using the local console or out-
side CentricStor on a workstation.
whether the X11 server runs within CentricStor using the local console or out-
side CentricStor on a workstation.
CentricStor
Info
Broker
SNMP
agent
SNMP management station
GXCC
CentricStor
Info
Broker
SNMP
agent
GXCC
Workstation
X11
server
SNMP manager
GXCC
GXCC
GXCC
GXCC
Application
launching
Optional if
there is no
RMT
license
X11 connection to GXCC, higher bit rate required
Traps from the SNMP agent in CentricStor to the management station
Connection between GXCC and InfoBroker; only a low bit rate required;
only with an RMT license in CentricStor.
only with an RMT license in CentricStor.
Application launching
i